Tree Allometrics

Raphia laurentii / Aboveground biomass

Raphia laurentii AGB from stem base diameter (m13, mean petiole diameter ≥5 cm)

Aboveground biomassRaphia laurentiiCongo - BrazzavillenaturalRead from the original paper
No openly licensed photo yet
Equation

As printed (Table 2, m13 row (AGB in kg dry mass); CF defined in Methods, p. 5)

m13 ln(AGB) = a + b × ln(D) -5.737 3.048 0.69 0.45 77.3 48.07 -3.76 1.11

In this library's units, ready to compute (kg)

Aboveground biomass = 1.11 * exp(-5.737 + 3.048 * ln(DRC))
DRC
Root collar / stem base diameter, cm

Whole-palm aboveground dry biomass (stem, sheaths, petioles, rachis and leaflets, so foliage is included). Stem base diameter was measured about 13 cm above the ground, mapped to DRC (root collar / stem base diameter); the fitted range of this variable is 8.20–35.40 cm (Table 1, all 90 palms), which is not DBH so it is not stored as a DBH range. Fitted on palms with mean petiole diameter 5–15 cm (60 palms); ranges of the subset are not given. CF is the printed correction factor (rounded to 2 decimals) and is applied in the expression. Single-predictor model: the paper's better models use the sum of petiole diameters (not a canonical variable; not captured), so this is a fallback for when only diameter or height is measured. R² adj printed: 0.69; RSE 0.45 (Table 2).

Source
The aboveground biomass estimated from each logarithmic linear model was multiplied by the following correction factor
Note · Development of allometric equations, p. 5
Table 2 range (n): 5–15 cm (60)
Trees measured · Table 2, mean petiole diameter range (n) column
Trees measured
60
Correction factor
1.11 (applied)
Method
ln-ln linear regression times correction factor CF = exp(RSE²/2)
Where
Peat swamp forest near Bolembe, Likouala Department, Republic of the Congo
Last checked
2026-11-02
Calculate
4
Aboveground biomass (kg)
1.88
Carbon (kg), ×0.47
6.89
CO₂e (kg), ×44/12
Checks this equation passes

On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.

InputsExpectedWe getFrom
DRC = 1044Computed from the printed form
computed from the published form (coefficients and CF as printed)
DRC = 2033.133.1Computed from the printed form
computed from the published form (coefficients and CF as printed)
DRC = 30114114Computed from the printed form
computed from the published form (coefficients and CF as printed)

Report a problem with this equation · JSON

Related

Compare these curves