Equations / Aboveground biomass, without leaves
Oak aboveground biomass without foliage or dead branches, Level 2
Not fully checked: The stored height range follows the abstract's 6–32 m, but Table 1 reports conflicting site height ranges. Fig. 2 supports taller trees than Table 1 lists for Lanžhot. Confirm the fitted height limits before treating them as firm applicability bounds.
Fitted on these 2 species: Quercus robur, Quercus petraea
As printed (Table 3, model below table and Aboveground biomass, Level 2 row, p. 115)
In this library's units, ready to compute (kg)
Aboveground biomass, without leaves = 0.999 * exp(-3.069 + 2.137 * ln(D) + 0.661 * ln(H))D- Diameter at breast height (1.3 m), cm
H- Total tree height, m
The printed correction factor multiplies the back-transformed prediction. Aboveground biomass comprises stem over bark and living branches; it excludes foliage and dead branches. The authors recommend a single aboveground equation over summing component predictions. Adjusted R² is not stored as unadjusted R².
doi:10.17221/2906-jfs · Peer-reviewed · Open access · copy we read
–3.069 2.137 0.661
Biomass component = λ × exp(p0 + p1 × lnD
correction factor (λ)
sum of stem-wood over bark and living branches.
no leaf biomass
D (cm)
Tree height (m)
AB (kg/tree)
Quercus robur; Quercus petraea
different regions of the Czech Republic
temperate region
51 grown trees sampled from 6 sites
breast height diameter (D) ranging from 6 to 59 cm
breast height diameter (D) ranging from 6 to 59 cm
tree height (H) from 6 to 32 m
tree height (H) from 6 to 32 m
0.996 0.084 0.999 6.9
linearized model (Eq. 3)
- Trees measured
- 51
- DBH range
- 6–59 cm
- Height range
- 6–32 m
- Correction factor
- 0.999 (applied)
- Method
- Linearized regression
- Where
- Six sites in the Czech Republic
- Last checked
- 2026-11-05
Shaded: the DBH range the model was fitted on. Other inputs held at the values above.
On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.
| Inputs | Expected | We get | From |
|---|---|---|---|
| D = 30, H = 20 | 482 | 482 | Computed from the printed form Computed from the printed coefficients and correction factor. |
Related
- Oak aboveground biomass without foliage or dead branches, Level 1 · Cienciala et al. 2008 · DBH
- Oak aboveground biomass without foliage or dead branches, Level 3 · Cienciala et al. 2008 · DBH + Height + Crown diameter
- Six Guanajuato oaks pooled, total aboveground biomass fitted directly (model 3) · Cortés-Sánchez et al. 2019 · DBH + Height
- Six Guanajuato oaks pooled, total aboveground biomass fitted directly (model 4) · Cortés-Sánchez et al. 2019 · Wood density + DBH + Height
- Quercus candicans: total aboveground biomass (sum of components) · Cortés-Sánchez et al. 2019 · DBH + Height
- Quercus coccolobifolia: total aboveground biomass (sum of components) · Cortés-Sánchez et al. 2019 · DBH + Height
- Quercus group 1 (rugosa, candicans, laurina): total aboveground biomass (sum of components) · Cortés-Sánchez et al. 2019 · DBH + Height
- Quercus laurina: total aboveground biomass (sum of components) · Cortés-Sánchez et al. 2019 · DBH + Height
- Oak aboveground biomass without foliage or dead branches, Level 1 · same paper · Aboveground biomass, without leaves
- Oak aboveground biomass without foliage or dead branches, Level 3 · same paper · Aboveground biomass, without leaves
- Oak dead branch biomass, Eq. 1 · same paper · Branch biomass
- Oak dead branch biomass, Eq. 2 · same paper · Branch biomass
- Oak living branch biomass, Level 1 · same paper · Branch biomass
- Oak living branch biomass, Level 2 · same paper · Branch biomass
- Oak stem biomass over bark, Level 1 · same paper · Stem biomass
- Oak stem biomass over bark, Level 2 · same paper · Stem biomass