Tree Allometrics

Pinus resinosa / Stem biomass

Canadian national equation, red pine, dbh only (stem wood plus stem bark; Table 3)

Stem biomassPinus resinosa · PinaceaeCanadaRead from the original paper
Photo of Pinus resinosa
© timmenzies on Flickr · CC BY-SA · iNaturalist
Equation

As printed (Eq. 2)

y wood = β wood1D βwood2 + ewood

In this library's units, ready to compute (kg)

Stem biomass = 0.0564 * D^2.4465 + 0.0188 * D^2.0527
D
Diameter at breast height (1.3 m), cm

Stem from ground level to tree top, stem wood plus stem bark; the stem is the sum of the two compartment equations. r2 is the adjusted R² (AdjRSq) of this compartment in Table 5. Fitted on the original scale (weighted nonlinear seemingly unrelated regression), so there is no back-transform correction. Dead branches, cones and fruits are not part of aboveground biomass in this work (Materials). Stand type was not always recorded. Ung, Bernier & Guo (2008) later revised parameters for some species with British Columbia data; not used here.

Source
y bark = β bark1D βbark2 + e bark
Equation · Eq. 2
Red pine bwood1 0.0564
Equation · Table 3, Red pine
bwood2 2.4465
Equation · Table 3, Red pine
bbark1 0.0188
Equation · Table 3, Red pine
bbark2 2.0527
Equation · Table 3, Red pine
Red pine 371 22.4±0.6 16.4±0.3 216.5±12.6
Trees measured · Table 2 (No. of trees)
(1.3;55.1) (1.8;34.4) (0.3;1572.6)
Smallest DBH · Table 2, Red pine (ranges of dbh, height, total biomass)
Stem 0.0022 0.84 80.5 4.31 0.0092 0.98 28.2 3.23
R² · Table 5, Red pine (AdjRSq in the dbh-based set, first block)
Trees measured
371
DBH range
1.3–55.1 cm
R²
0.84
Method
Nonlinear seemingly unrelated regression with weight functions; additivity constrained so compartments sum to total
Where
Canada: Nova Scotia, Ontario, Quebec (ENFOR archival data, early 1980s)
Last checked
2026-11-03
Calculate
94.8
Stem biomass (kg)
44.5
Carbon (kg), ×0.47
163
CO₂e (kg), ×44/12
Fitted DBH range0100200300400500600510152025303540DBH (cm)Stem biomass (kg)Stem biomass

Shaded: the DBH range the model was fitted on. Other inputs held at the values above.

Checks this equation passes

On every build, the library's form and the paper's own form (in its units) must both give these values within 1%.

InputsExpectedWe getFrom
D = 2094.894.8Computed from the printed form
computed from the published form at dbh = 20 cm

Report a problem with this equation · JSON

Related

Compare these curves